new product ss10p2cl & ss10p3cl vishay general semiconductor document number: 89036 revision: 26-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 high current density surface mount dual common-cathode schottky rectifiers features ? very low profile - typical height of 1.1 mm ? ideal for automated placement ? low forward voltage drop, low power losses ? high efficiency ? low thermal resistance ? ?green? molding compound (gmc) ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec mechanical data case: to-277a (smpc) molding compound meets ul 94v-0 flammability rating. ?g? vs. ?e? suffix defines molding as none green, ?e?, or green molding compound (gmc) ?g?. ?g? is defined as halogen-free (hf) and antimony-free molding compound. terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 and g3 suffix for consumer grade, meets jesd 201 class 1a whisker test, he3 and hg3 suffix for high reliability grade (aec q101 qualified), meets jesd 201 class 2 whisker test typical applications for use in high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters and polarity protection applications. note: ? there is no industry standard for definition of hf, or gmc for components. primary characteristics i f(av) 2 x 5 a v rrm 20 v, 30 v i fsm 200 a e as 20 mj v f at i f = 5 a 0.338 v t j max. 150 c to-277a (smpc) k 2 1 anode 1 anode 2 cathode k esmp tm series maximum ratings (t a = 25 c unless otherwise noted) parameter symbol ss10p2cl ss10p3cl unit device marking code s102cl s103cl maximum repetitive peak reverse voltage v rrm 20 30 v maximum average forward rectified current (fig. 1) total device per diode i f(av) 10 5.0 a peak forward surge current 10 ms single half sine-wave superimposed on rated load per diode i fsm 200 a non-repetitive avalanche energy at 25 c, i as = 2 a per diode e as 20 mj operating junction and storage temperature range t j, t stg - 55 to + 150 c
new product ss10p2cl & ss10p3cl vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 89036 revision: 26-may-08 2 notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms note: (1) units mounted on recommended p.c.b. 1 oz. pad layout note: (1) automotive grade aec q101 qualified electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit instantaneous forward voltage per diode (1) i f = 2.5 a i f = 5.0 a t a = 25 c v f 0.391 0.440 - 0.52 v i f = 2.5 a i f = 5.0 a t a = 125 c 0.272 0.338 - 0.42 reverse current per diode (2) rated v r t a = 25 c t a = 125 c i r 95 37 850 55 a ma typical junction capacitance per diode 4.0 v, 1 mhz c j 560 - pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol ss10p2cl ss10p3cl unit typical thermal resistance per diode r ja (1) r jl 60 3 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode ss10p3cl-e3/86a 0.10 86a 1500 7" diameter plastic tape and reel ss10p3cl-e3/87a 0.10 87a 6500 13" diameter plastic tape and reel ss10p3clhe3/86a (1) 0.10 86a 1500 7" diameter plastic tape and reel ss10p3clhe3/87a (1) 0.10 87a 6500 13" diameter plastic tape and reel ss10p3cl-g3/86a 0.10 86a 1500 7" diameter plastic tape and reel ss10p3cl-g3/87a 0.10 87a 6500 13" diameter plastic tape and reel ss10p3clhg3/86a (1) 0.10 86a 1500 7" diameter plastic tape and reel ss10p3clhg3/87a (1) 0.10 87a 6500 13" diameter plastic tape and reel
new product ss10p2cl & ss10p3cl vishay general semiconductor document number: 89036 revision: 26-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 ratings and characteristics curves (t a = 25 c unless otherwise noted) figure 1. maximum forward current derating curve figure 2. forward power loss characteristics per diode figure 3. typical instantaneous forw ard characteristics per diode 0 2 4 6 8 12 10 0 25 50 75 100 125 150 175 a v erage for w ard c u rrent (a) lead temperat u re (c) resisti v e or ind u cti v e load t l meas u red at the cathode band terminal 0 0. 8 0.4 1.2 1.6 2.0 2.4 01234 6 a v erage for w ard c u rrent (a) a v erage po w er loss ( w ) d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0. 8 d = 1.0 5 d = t p /t t p t 0.01 0.1 1 10 100 0.2 0.1 0.3 0 0.4 0.5 0.6 0.7 0.9 0. 8 instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) t a = 150 c t a = 125 c t a = 25 c figure 4. typical reverse leak age characteristics per diode figure 5. typical juncti on capacitance per diode figure 6. typical transient thermal impedance per diode 0.001 0.01 0.1 1 10 1000 100 10 20 30 40 60 50 70 90 8 0 100 percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse c u rrent (ma) t a = 150 c t a = 125 c t a = 25 c 100 10 000 1000 0.1 1 10 100 re v erse v oltage ( v ) j u nction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p 0.01 0.1 1 10 100 1 10 100 t - p u lse d u ration (s) transient thermal impedance (c/ w ) j u nction to am b ient
new product ss10p2cl & ss10p3cl vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 89036 revision: 26-may-08 4 package outline dimensions in inches (millimeters) conform to jedec to-277a 0.016 (0.40) 0.006 (0.15) 0.047 (1.20) 0.039 (1.00) 0.1 8 7 (4.75) 0.175 (4.45) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.23 8 (6.05) 0.171 (4.35) 0.167 (4.25) k 21 0.026 (0.65) n om. to-277a (smpc) 0.146 (3.70) 0.134 (3.40) 0.0 8 7 (2.20) 0.075 (1.90) 0.1 8 9 (4. 8 0) 0.173 (4.40) 0.049 (1.24) 0.037 (0.94) 0.053 (1.35) 0.041 (1.05) 0.030 (0.75) n om. 0.0 8 4 (2.13) n om. 0.155 (3.94) n om. mountin g pad layout 0.26 8 (6. 8 0) 0.1 8 6 (4.72) mi n . 0.050 (1.27) mi n . 0.041 (1.04) 0.055 (1.40) mi n . 0.1 8 9 (4. 8 0) mi n .
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
